Syringe And Infusion Pump suppliers Infusion Pump 1. Bubble detector and pressure sensor can precisely detect tube air bubbles 2. Automatically calibration and compatible with any brand infusion sets. 3. Unique human voice alarm system and accurate injection rate make the injection process safer and more reliable 4. HD LCD display working status. 5. Working mode: ml/h and drop/min, and these two modes can switch freely. 6. KVO and Bolus functions. 7. Save the last infusion rate automatically when there is unpredicatable switch off. 8. Transfer the message between the Nurse-call System and the pumps. Technical parameters: Infusion mode1. Rate mode 2. Time volume mode Unique Human Voice Alarm systemThe device triggered the human voice prompt and stop injection automatically when there is any malfunction, making the infusion process safer and more reliable. Rate:1ml/h锝?,200ml/h Flow Rate Accuracy:Within 卤5% (after correct calibration) Mechanical precision:Within 卤2% Purge Rate:100ml/h锝?,000ml/h (100 ml/h step) Infusion Volume:1ml锝?999ml Total Infusion Volume:0.1ml锝?999.9ml KVO rate:1ml/h锝? ml/h (1ml/h step) Occlusion:High: 800mmHg 卤200mmHg (106.7kPa卤26.7kPa Medium: 500mmHg 卤100mmHg(66.7kPa卤13.3kPa Low: 300mmHg 卤100mmHg (40.7kPa卤13.3kPa ) Alarms:End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc. Power Source:AC 100V锝?40V, 50/60Hz; Internal rechargeable Li battery, capacity鈮?,600mAh, 4 hours internal battery backup Bubble detector:Ultrasonic wave detector; detection sensitivity 鈮?5渭L Fuse:F1AL/250V, 2 pc inside Power Consumption:30VA Operating Condition:Ambient temperature: +5鈩冿綖+40鈩? Relative humidity: 20锝?0% Atmospheric pressure: 86.0kpa锝?06.0kpa Transport & Storage Condition:Ambient temperature: -30鈩冿綖+55鈩?/p> Relative humidity: 鈮?5% Equipment Classification:Class II, Type BF IP Classification:IPX4 Dimension:340mm (L) 脳 280mm (W) 脳 270mm (H) Weight:1.8kg (net weight)Syringe And Infusion Pump suppliers website:http://www.joradiant-med.com/operating-room-equipment/syringe-and-infusion-pump/
Syringe And Infusion Pump suppliers Infusion Pump 1. Bubble detector and pressure sensor can precisely detect tube air bubbles 2. Automatically calibration and compatible with any brand infusion sets. 3. Unique human voice alarm system and accurate injection rate make the injection process safer and more reliable 4. HD LCD display working status. 5. Working mode: ml/h and drop/min, and these two modes can switch freely. 6. KVO and Bolus functions. 7. Save the last infusion rate automatically when there is unpredicatable switch off. 8. Transfer the message between the Nurse-call System and the pumps. Technical parameters: Infusion mode1. Rate mode 2. Time volume mode Unique Human Voice Alarm systemThe device triggered the human voice prompt and stop injection automatically when there is any malfunction, making the infusion process safer and more reliable. Rate:1ml/h锝?,200ml/h Flow Rate Accuracy:Within 卤5% (after correct calibration) Mechanical precision:Within 卤2% Purge Rate:100ml/h锝?,000ml/h (100 ml/h step) Infusion Volume:1ml锝?999ml Total Infusion Volume:0.1ml锝?999.9ml KVO rate:1ml/h锝? ml/h (1ml/h step) Occlusion:High: 800mmHg 卤200mmHg (106.7kPa卤26.7kPa Medium: 500mmHg 卤100mmHg(66.7kPa卤13.3kPa Low: 300mmHg 卤100mmHg (40.7kPa卤13.3kPa ) Alarms:End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc. Power Source:AC 100V锝?40V, 50/60Hz; Internal rechargeable Li battery, capacity鈮?,600mAh, 4 hours internal battery backup Bubble detector:Ultrasonic wave detector; detection sensitivity 鈮?5渭L Fuse:F1AL/250V, 2 pc inside Power Consumption:30VA Operating Condition:Ambient temperature: +5鈩冿綖+40鈩? Relative humidity: 20锝?0% Atmospheric pressure: 86.0kpa锝?06.0kpa Transport & Storage Condition:Ambient temperature: -30鈩冿綖+55鈩?/p> Relative humidity: 鈮?5% Equipment Classification:Class II, Type BF IP Classification:IPX4 Dimension:340mm (L) 脳 280mm (W) 脳 270mm (H) Weight:1.8kg (net weight)Syringe And Infusion Pump suppliers website:http://www.joradiant-med.com/operating-room-equipment/syringe-and-infusion-pump/
0 Comments
0 Shares
